IBM 8308, 8309, 8312, 8313, 8311, 8310, 8315, 8314, 8301, 8306, 8304, 8302, 8303, 8305 manual What to do next

not interfere with other cables that are connected to the computer. For more information about security, see Installing a cable lock in Access IBM.

To install a rope clip:

1.Remove the cover. See “Types 8305, 8306, 8309, and 8313” on page 40.

2.Use a tool, such as a screwdriver, to remove the two metal knockouts.

3.Insert the rope clip through the rear panel; then attach and tighten the nuts with an appropriately sized or adjustable wrench.

4.Replace the computer cover. For more information, see “Types 8305, 8306, 8309, and 8313” on page 68.

5.Thread the cable through the rope clip and around an object that is not a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then fasten the cable ends together with a lock.

What to do next

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Types 8305, 8306, 8309, and 8313” on page 68.

Installing a rope clip in Types 8307, 8308, 8310, 8311, 8314, and 8315

To help prevent hardware theft, you can add a 3/16-inch or 5-mm rope clip and cable to your computer. After you add the security cable, make sure that it does not interfere with other cables that are connected to the computer. For more information about security, see Installing a cable lock in Access IBM.

To install a rope clip:

Chapter 5. Installing Options 65