Samsung SCX-4116, SCX-4016 manual Clearing LCD Error Messages, Display Meaning Suggested solutions

Clearing LCD Error Messages

Display		Meaning	Suggested solutions
		Your machine’s memory is	To cancel the fax job, press the 1
		full during the machine	button to accept “Yes.”
Cancel	?	stores the document into	If you want to send the pages were
1:Yes	2:No	the memory.	stored, press the 2 button to accept
(only for SCX-4216F)			“No.” You should send the
			remaining pages later when the
			memory is available.
Comm. Error		The machine has a	Ask the sender to try again.
(only for SCX-4216F)		communication problem.
Document Jam		The loaded document has
		jammed in the ADF	Clear the document jam. See
(only for SCX-4116/
		(Automatic Document	page 8.2.
4216F)
		Feeder).
Door Open		The front or rear cover is	Close the cover until it locks into
		not securely latched.	place.
CRU Fuser Error
			Unplug the power cord and plug it
Heating Error		There is a problem in the
			back in. If the problem persists,
		fuser unit.
Open Heat Error
			please call for service.
Over Heat
		You have tried to select a	Just use a speed dial number or dial
		group location number	a number manually using the
Group Not		where only a single	number keypad.
Available		location number can be
(only for SCX-4216F)		used, such as when
		adding locations for a
		broadcasting operation.
		The remote machine did	Reconfirm the remote machine’s
		not have the requested	features.
		feature, such as a delayed
		transmission.
Incompatible		It also occurs if the
(only for SCX-4216F)				8
		remote machine does not
		have enough memory
		space to complete the
		operation you are
		attempting.
Invalid		You have used	You must use a Samsung approved
Cartridge		unauthorised cartridge.	cartridge.

TROUBLESHOOTING 8.11