Samsung SCX-4016 manual Try again after a few minutes, Answer or the line is, Contact because of a

Display	Meaning	Suggested solutions
Line Busy	The remote party did not	Try again after a few minutes.
	answer or the line is
(only for SCX-4216F)
	already engaged.
	Your machine cannot	Try again. If the problem persists,
	connect with the remote	wait an hour or so for the line to
Line Error	machine or has lost	clear and try again.
(only for SCX-4216F)	contact because of a	Or, turn the ECM mode on. See the
	problem with the phone
	line.	Facsimile User’s Guide.
	You have attempted to set	Load a document and try again.
Load Document	up a copy or fax operation
	with no document loaded.
	A problem has occurred in	Unplug the power cord and plug it
LSU Error	the LSU (Laser Scanning	back in. If the problem persists,
	Unit).	please call for service.
	The memory is full.	Delete unnecessary documents,
Memory Full		retransmit after more memory
		becomes available or split the
(only for SCX-4216F)
		transmission into more than one
		operation.
No Answer	The remote fax machine	Try again. Make sure that the
	has not answered after	remote machine is operational.
(only for SCX-4216F)
	several redial attempts.
No Cartridge	The toner cartridge is not	Install the toner cartridge. See
	installed.	page 1.10.
No. Not	The speed dial location	Dial the number manually using the
		number keypad or assign the
Assigned	you tried to use has no
		number. See the Facsimile User’s
(only for SCX-4216F)	number assigned to it.
		Guide.
No Paper	The paper in the paper	Load paper in the paper tray. See
	tray has run out.	page 1.12.
Operation Not	You are doing in the Add/	Check the display to see if there is
		any scheduled job. The display
Assigned	Cancel operation, but
		should indicate them in Standby
(only for SCX-4216F)	there is no jobs waiting.
		Mode, for example, Delay Fax.

8.12 TROUBLESHOOTING