IBM 8315, 8309, 8308, 8312, 8313, 8311, 8310, 8314, 8301, 8306, 8304, 8302, 8303, 8305 manual Not listed above

POST Error Code		FRU/Action
168		1.	Run Setup. Check to see that Ethernet
Alert on LAN error
			and Alert on LAN are enabled.
		2.	System Board
17X, 18X		1.	C2 Security
175	Primary Copy of Secure Data is	1.	Run Configuration. See “Setup Utility
damaged
			program” on page 24.
		2.	System Board
176	The System has been tampered with	1.	Covers were removed from the
			computer
177		1.	System Board
Corrupted Administrator Password
178		1.	System Board
179	Boot Integrity Services Segment Error	1.	System Board
183		1.	Enter the administrator password
184		1.	Make sure Asset Care and Asset ID are
Asset Control Antenna not detected
			enabled in Configuration/Setup
		2.	RFID Antenna
		3.	System Board
185		1.	Set configuration and reinstall the boot
Corrupted boot sequence
			sequence
186	Security Hardware Control Logic Error	1.	System Board
187		1.	Clear Administration password
		2.	System Board
189		1.	More than three password attempts
			were made to access the computer
190		1.	System Board
System Security: Invalid Remote Change
Requested
191	System Security: IBM Embedded	1.	System Board
Security Hardware Reset
193	System Security: IBM Embedded	1.	System Board
Security Hardware Removed
194	System Security: Asset ID Antenna has	1.	System Board
been Removed
195	System Security: Asset ID Antenna has	1.	System Board
been Installed
196	System Tampered Cleared	1.	System Board
1XX		1.	System Board
Not listed above
201, 20X		1.	Run Enhanced Diagnostics Memory
Memory data error
			Test
		2.	Memory Module
		3.	System Board

112Hardware Maintenance Manual