IBM 8303, 8309, 8308, 8312, 8313, 8311, 8310, 8315, 8314, 8301, 8306 Installing adapters, What to do next

3.Open the retaining clips.

4.Make sure the notches in the DIMM align with the tabs on the connector. Push or insert the DIMM straight down into the connector until the retaining clips close.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Replacing the cover and connecting the cables” on page 67.

Installing adapters

Types 8303, 8304, and 8312

This section provides information and instructions for installing and removing adapters. Your computer has three expansion slots for PCI adapters and one slot used for an AGP adapter. Adapters must be low profile. Your computer supports adapters up to 168 mm (6.6 inches) long.

To install an adapter:

1.Remove the cover. See “Removing the cover” on page 40.

48Hardware Maintenance Manual