IBM 8310, 8309, 8308, 8312, 8313, 8311, 8315, 8314, 8301, 8306, 8304, 8302, 8303, 8305 Installing Options

depending on the option that is installed, you might need to confirm the updated information in the IBM Setup Utility program.

To replace the cover and connect cables to your computer:

1.Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer.

2.Clear any cables that might impede the replacement of the cover.

3.Position the cover on the chassis so that the rail guides on the bottom of the cover engage the rails and push the cover closed until it latches.

4.Reconnect the external cables and power cords to the computer. See “Installing external options” on page 31.

5.To update the configuration, see “Setup Utility program” on page 24.

Important:

When the power cord is first plugged in, the computer might appear to turn on for a few seconds and then turn off. This is a normal sequence to enable the computer to initialize.

Chapter 5. Installing Options 69