IBM 8310, 8309 Post Error Code FRU/Action 111 Reseat adapters, Adapter Memory, Processor, Fan

POST Error Code	FRU/Action
111	1.	Reseat adapters
I/O channel parity error
	2.	Any adapter
	3.	Riser card
	4.	System Board
114	1.	Adapter Memory
Adapter ROM error
	2.	System Board
	3.	Riser card
129	1.	Processor
Internal cache test error
	2.	L2 Cache Memory
	3.	System Board
135 Fan failure	1.	Fan
	2.	System board
151	1.	System Board
System board failure
161	1.	Run Setup
Bad CMOS battery
	2.	CMOS Backup Battery (see “Safety
		information” on page 271)
	3.	System Board
162	1.	Run Setup and verify Configuration
Configuration mismatch
	2.	Had a device been added, removed,
		changed location? If not, suspect that
		device.
	3.	Power-on external devices first, then
		power-on computer
	4.	CMOS Backup Battery (see “Safety
		information” on page 271)
		System Board
	5.	System Board
163	1.	Time and Date Set
Date and Time Incorrect
	2.	CMOS Backup Battery (see “Safety
		information” on page 271)
	3.	System Board
164	1.	Run Setup. Check System Summary
Memory Size Error
		menu for memory size change. (See
		“Setup Utility program” on page 24.)
	2.	Run the Extended Memory Diagnostic
		tests
166	1.	Run Flash Recovery using Boot Block.
Boot Block Check Sum Error
		See “Flash recovery boot block jumper”
		on page 267.
	2.	System Board
167	1.	Run Setup. Check Stepping level for
No Processor BIOS Update Found
		the BIOS level needed, then perform
		the flash update.
	2.	Processor

Chapter 7. Symptom-to-FRU Index 111