IBM 8305, 8309, 8308, 8312, 8313, 8311, 8310, 8315, 8314, 8301, 8306, 8304, 8302, 8303 Symptom-to-FRU Index

Diagnostic Error Code	FRU/Action
001-038-XXX	1.	Adapter card
System Extension failure
	2.	System board
001-039-XXX	1.	Flash the system
System DMI data structure error
	2.	System board
001-040-XXX	1.	Power-off/on system and re-test
System IRQ failure
	2.	System board
001-041-XXX	1.	Power-off/on system and re-test
System DMA failure
	2.	System board
001-195-XXX	1.	Information
System Test aborted by user
	2.	Re-start the test, if necessary
001-196-XXX	1.	Press F3 to review the log file
System test halt, error threshold exceeded
	2.	Re-start the test to reset the log file
001-197-XXX	1.	Make sure the component that is called
System test warning
		out is connected and/or enabled
	2. Re-run test
	3. Component that is called out in warning
		statement
	4.	Component under test
001-198-XXX	1.	If a component is called out, make sure
System test aborted
		it is connected and/or enabled
	2. Flash the system and re-test
	3. Go to the ″Undetermined problems″
		section
001-199-XXX	1.	Go to the ″Undetermined problems″
System test failed, cause unknown
		section
	2. Flash the system and re-test
	3. Replace component under function test
001-250-XXX	1.	System board
System ECC error
001-254-XXX	1.	System board
001-255-XXX
001-256-XXX
001-257-XXX
System DMA error
001-260-XXX	1.	System board
001-264-XXX
System IRQ error
001-268-XXX	1.	Device on IRQ1
System IRQ1 failure
	2.	System board
001-269-XXX	1.	Device on IRQ2
System IRQ2 failure
	2.	System board
001-270-XXX	1.	Device on IRQ3
System IRQ3 failure
	2.	System board

Chapter 7. Symptom-to-FRU Index 91