The Kramer T-RC-8IR TBUS Mounting Insert Kit for RC-8IR
Congratulations on purchasing your Kramer insert kit for the RC-8IR. The T-RC-8IRlets you add the RC-8IRto TBUS inner frames that include dual power socket openings. (The
TBUS-1Axl,TBUS-10xl and TBUS-18xl).
Figure 1: T-RC-8IR Insert Kit for RC-8IR (P/N: 80-000599)
! | Note that you can only use the EUROPEAN VERSION of the |
RC-8IRwith the T-RC-8IRwhen installing in a TBUS. Other |
| versions will not fit the T-RC-8IR. |
Installing the T-RC-8IR Insert Kit for RC-8IR
To install the T-RC-8IRinsert:
1.Unscrew the two faceplate attachment screws and remove the RC-8IRfaceplate.
Figure 2: RC-8IR Faceplate Holes Insert Kit for RC-8IR
2.Place the T-RC-8IRover the RC-8IRenclosure so that both faceplate holes are aligned with the faceplate holes on the RC-8IRenclosure and the IR IN receiver fits into the IR IN opening (see Figure 3).
3.Insert the faceplate screws through the T-RC-8IRand RC-8IRenclosure faceplate holes, and tighten.
Figure 3: T-RC-8IR Installation
