Kramer Electronics manual Installation Instructions, Connecting the Cables, RC-8IR

4.Place the assembled T-RC-8IR+ RC-8IRunder the dual socket opening.

5.Insert the two screws (supplied with the kit) to fix the T-RC-8IRin place, and tighten them.

Figure 4: Fix the T-RC-8IR in Place

Connecting the Cables

To connect the cables:

1.Insert the cables to their appropriate connectors from underneath.

2.Secure the cables to the tie holes on the TBUS.

Do not secure the cables too tightly or too loosely. Leave a small amount of slack.

After the unit is connected to mains power and the proper cables, it is ready for use.

KRAMER ELECTRONICS LTD .

Installation

Instructions

MODEL:

T-RC-8IR

Insert Kit for RC-8IR

European Version Only

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to these installation instructions may be found

We welcome your questions, comments, and	For more detailed
feedback.	information regarding
Web site: www.kramerelectronics.com	this product scan the
E-mail:info@kramerel.com	QR code:

!SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

P/N: 2900-300060 Rev 4

P/N: 2900- 300060 Rev: 4