Specifications
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
ENGINE:
18.5 HP* Briggs & Stratton
Make | Briggs & Stratton | |
Model | 18.5 hp Intek | |
Horsepower | 18.5 | @ 2550 rpm |
Displacement | 30.6 | Cu. in (502 cc) |
Electrical System | 12 Volt, 9 amp. Alternator, Battery: 230 CCA | |
Oil Capacity | 48 Oz. (1.4 L) w/ Filter | |
CHASSIS:
Fuel Tank | Capacity: 3.0 Gallons (11.4 L) |
Rear Wheels | Tire Size: 18 x |
| Inflation Pressure: 15 psi (1,03 bar) |
Front Wheels | Tire Size: 11 x |
| Inflation Pressure: 25 psi (1,72 bar) |
CE COMPLIANCE SPECIFICATIONS:
TRANSMISSIONS:
ZA-DHBB-2D5A-2DCX (LH)
ZA-AHBB-2D5A-2DCX (RH)
Type | EZT |
Hydraulic Fluid | Sealed Unit |
Speeds | Forward: |
@ Specified rpm | Reverse: |
Continuous Torque | 115 ft. lbs. (155 N.m.) |
Output |
|
Maximum Weight | 340 lbs. (154 Kg) per Axle |
on Axle |
|
DIMENSIONS:
Overall Length | 72” (182,9 cm) |
Overall Width | 55” (139,7 cm) |
Height | 38” (96,5 cm) |
Weight (apx.) |
|
Snapper | 601 lbs. (273 kg) |
Simplicity | 617 lbs. (280 kg) |
Model | ERZT185440BVE (Snapper) ERZT185440BVE (Simplicity) | |
RPM’s (Governed) | 2550 | 2550 |
Kilowatts (kW) (@ Governed RPM’s) | 13.8 | 13.8 |
Unit Mass (kg) | 273 | 280 |
Sound Power (LWA) (dBA) | 100 | 100 |
Sound Pressure (LPA) (dBA) | 86 | 86 |
Vibration (Hand) (m/s2) | 9.8 | 9.8 |
Vibration (Body) (m/s2) | 0.7 | 0.7 |
33
