LUBRICATION
Lubricate the unit at the points shown in Figure 13, as well as the others listed in this section.
Grease:
•front caster wheel axles
•front caster spindle bosses
•front axle center pivot
•mower deck arbors (blade spindles) *
•mower deck idler arm
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Use
*Some deck arbors have grease fittings above the mower deck, while others have grease fittings below the deck.
2x
2x
3x
Regular Maintenance
Oil:
•motion control lever pivot points
•discharge chute hinge
•deck lift pivot points
Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and sur- faces clean both before and after lubrication.
Figure 13. Lubrication Points (Grease)
17
