HP 7000 dl Router manual Show arp, Enable #show arp

SROS Command Line Interface Reference Guide Enable Mode Command Set

show arp

Use the show arp command to display the Address Resolution Protocol (ARP) table.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output of the show arp command:

>enable

#show arp

ADDRESS	TTL (min)	MAC ADDRESS	INTERFACE
10.15.225.162	16	00:12:79:11:69:11	eth 0/1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 105