HP 7000 dl Router manual Netbios-name-serveraddress1 address2

SROS Command Line Interface Reference Guide IKE Client Command Set

netbios-name-server<address1> <address2>

Use the netbios-name-servercommand to specify the NetBIOS Windows Internet Naming Service (WINS) name servers to assign to a client.

Syntax Description

<address1>	The first WINs server address to assign.
<address2>	The second WINs server address to assign.

Default Values

By default, no WINs server address is defined.

Command Modes

(config-ike-client-pool)# IKE Client Configuration Mode

Usage Examples

The following example defines two WINs server addresses for this configuration pool:

(config-ike-client-pool)#netbios-name-server 172.1.17.1 172.1.17.25

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 395