Westell Technologies 2100 manual Service Configuration, Creating a New Service Profile

User Guide WireSpeed Dual Connect NAT Router

Service Configuration

The following settings will be displayed if you select Service Configuration from the Configuration menu.

Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router are open and that the required application traffic can pass through your LAN. For a list of supported services, please go to section 9.8 (NAT Services).

Current Profile	Displays the NAT (Network Address Translation) services that you have
	selected.
Service Name	Drop down selection menu of NAT (Network Address Translation) service you
	can select to configure you Router.

Creating a New Service Profile

If you select new from the preceding Service Configuration screen, the Create new Service Profile? pop-up screen will be displayed. Click on OK to begin creating your new NAT profile. Click Cancel if you do not want to create a new NAT profile.

If you clicked on OK, the following screen will be displayed. Select “A New Service Profile #1” from the Current Profile pull-down arrow.

NOTE: You may create up to four NAT profiles and attach an unlimited number of services to each profile.

030-300198 Rev. D 61 March 2003