User Guide

WireSpeed Dual Connect NAT Router

 

 

Connect/Disconnect

CONNECT = Establish a PPP session

 

DISCONNECT = Disconnect a PPP session

Profile Editor

This allows you to make changes to the profile that you created in section 7.

Adding Account Profiles

If you select the Profile Editor button from your Home page, the Advanced Home screen will appear, as show below. Click on the new connection button in the Advanced Home screen. The New Connection screen will appear. Enter your account parameters in the New Connection screen, as defined in section 7, to establish a new user profile and click on new. Next, click on OK in the pop-up screen to save your new connection. If you don’t want to add a connection profile, click on close in the New Connection screen. You can store up to eight unique user profiles in your Router. Details on the New Connection screen are located at the end of this section.

If you select Edit from the Advanced Home screen, the Edit “My Connection” screen will appear. Follow the steps in the Edit “My Connection” screen to change your existing account profile, which you set up in section 7. If you don’t want to change your account profile, click on close. Click on delete if you want to delete your connection profile.

030-300198 Rev. D

39

March 2003

Page 41
Image 41
Westell Technologies 2100 manual Adding Account Profiles