![](/images/new-backgrounds/1263324/26332459x1.webp)
User Guide | WireSpeed Dual Connect NAT Router |
7.2 Establishing a DSL Sync
Remember, you must have active DSL service before the Router can synchronize with your ISP’s equipment. To determine if your Router has a DSL sync, view the DSL Connection Rate at the Connection Overview section (see the following homepage screen). If the status reads No DSL Connection, check the DSL physical connection, explained in section 5 (INSTALLATION INFORMATION) of this User Guide.
NOTE: If no DSL sync is established, the connect button in this screen will not be displayed. To determine if the DSL sync is established, check the Router’s READY LED. If the READY LED is not solid green, you do not have a DSL sync established. Contact your ISP for details.
The screen below shows the connection rate with values that indicate a successful SYNC has been established. The connection rate values represent the transmission speed of your DSL line. (The Router may take time to report the values.) Click on the connect button to establish a PPP session.
28 | March 2003 |