User Guide | WireSpeed Dual Connect NAT Router |
P
Private LAN
This page contains the settings that control how the ADSL router interacts with the local devices connected to the router. It is not recommended that these settings be changed. The following settings are displayed.
| Private LAN |
Private LAN DHCP Server | Dynamic Host Configuration Protocol (DHCP) is an Internet standard that |
Enable | allows the ADSL router to automatically assign IP addresses to devices |
| connected on the LAN network. It is advised that this is enabled for Private |
| LAN. |
Private LAN Enable | This setting enables the Private NAT’ed interface. It is advised to leave this |
| enabled. |
Modem IP Address | This controls the IP address that the ADSL router uses for local |
| communication. |
Subnet Mask | This setting specifies the subnet mask to use to determine if an IP address |
| belongs to your local network. |
DHCP Start Address (If | This setting specifies the start of the IP address pool that the modem uses to |
DHCP is enabled for | assign IP addresses to local devices. |
Private LAN) |
|
DHCP End Address (If | This setting specifies the end address of the IP address pool used for automatic |
DHCP is enabled for | configuration of local devices. |
Private LAN) |
|
DHCP Lease (If DHCP is | This setting specifies the DHCP lease time. |
enabled for Private LAN) |
|
Protocol
Protocol
Protocol
This screen informs the Router which networking protocol to use when communicating with your ISP. Your ISP provides this information.
Public LAN
This screen contains the settings that control how the ADSL router interacts with the local devices connected to the router. It is not recommended that these settings be changed. The following settings are displayed.
|
| Public LAN |
|
|
| Public LAN DHCP Server | Dynamic Host Configuration Protocol (DHCP) is an Internet standard that |
|
|
| Enable | allows the ADSL router to automatically assign IP addresses to devices |
|
|
|
| connected on the LAN network. It is advised that this is enabled for Private |
|
|
|
| LAN. |
|
|
| Public LAN Enable | This setting enables the Public interface. This feature allows a global subnet to |
| |
|
| exist behind your modem. |
|
|
| Modem IP Address | This controls the IP address that the ADSL router uses for local |
|
|
|
| communication. |
|
|
| Subnet Mask | This setting specifies the subnet mask to use to determine if an IP address |
|
|
|
| belongs to your local network. |
|
|
|
|
|
|
|
|
| 105 | March 2003 | |
