Westell Technologies 2100 manual Advanced Service Configuration

User Guide WireSpeed Dual Connect NAT Router

9.4Advanced Service Configuration

You can set up additional Service Configuration options for your Dual Connect Router that allow you to enter the port forwarding and trigger ports ranges of your choice. Go to Configuration at the homepage menu and select Service Configuration.

When you click on define custom service in the Service Configuration screen, the Custom Service screen will guide you through the steps of creating an advanced NAT service entry via the define custom service button.

NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any problems, please reset your Router via the external hardware re-set button or the procedure defined under the Maintenance menu.

Port Forwarding Ranges of Ports	This option allows you to forward a range of WAN ports to an IP address on
	the LAN.
Trigger Ports	This option allows you to forward a range of ports to an IP address on the
	LAN only after specific outbound traffic.

030-300198 Rev. D 71 March 2003