User Guide

WireSpeed Dual Connect NAT Router

8.Windows 98: Figure 13 may pop up, depending on how Windows 98 was installed on the computer. The installation of the Westell modem requires files that are supplied by Microsoft for Windows 98. If Figure 14 pops up, insert the Windows 98 Operating System CD into the computer’s CD-ROM drive, wait a moment for the CD to be recognized by the system, and then click on OK. The system should find the required files on the Windows 98 CD and automatically complete the installation.

Figure 13. Windows 98

If the Operating System CD is not available, or if Figure 13 pops up again, you will need to manually specify the location of the files. The required files may be stored on your hard drive. A common location for these files is "C:\Windows\Options\Cabs." Try specifying this path or the path to your CD-ROM drive (usually "D:\") by clicking the Browse… button in the Insert Disk screen (see Figure 14). When you have specified the correct path, click on OK. The system will begin copying the files. See Figure 15.

NOTE: It is very important that the Windows 98 files be installed. Do not click on Cancel or Skip File in the dialogs, doing so will result in an improper installation, and the modem will not function properly.

Figure 14. Windows 98

030-300198 Rev. D

15

March 2003

Page 17
Image 17
Westell Technologies 2100 manual Windows