Westell Technologies 2100 manual Disabling Single Static IP

User Guide WireSpeed Dual Connect NAT Router

Disabling Single Static IP

The following screen displays that Single Static IP is enabled for device you selected. Click on disable if you want to disable the Single Static IP for this device.

STOP! After you enable Single Static IP, you must reboot your computer and establish your PPP session.

If you clicked on disable in the preceding screen, the following pop-up screen will be displayed. Click on OK.

If you clicked on OK in the Disable IP Passthrough? screen, the following pop-up screen will be displayed. Click on OK. This will allow the modem to be reset, and the new configuration will take affect.

030-300198 Rev. D 59 March 2003