030-300198 Rev. D 66
March 2003
WireSpeed Dual Connect NAT Router User Guide
If you clicked on OK in the preceding pop-up screen, the Host Device screen will be displayed. The Host Device
screen will allow you to select which device will host the NAT service you selected on your local area network.
Select the device from the Host Device pull-down arrow and click on done.
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to
your profile, you must first select the new NAT service. Next, load the new NAT Configuration, as explained earlier
in this section.
Once you have selected a NAT service and you have saved it to your NAT profile, the screen below will be
displayed. It shows which NAT service is active for the selected profile.