![](/images/new-backgrounds/1263324/26332413x1.webp)
User Guide | WireSpeed Dual Connect NAT Router |
5. INSTALLATION INFORMATION
5.1 Installation Requirements
To install the Dual Connect Router, you will need the following:
•A Network Interface Card (NIC) installed in your PC or
•An available USB port installed on your PC.
•A
NOTE: Please wait until you have received notification from your service provider that your DSL line has been activated before installing this Router and software.
5.2 Before you begin:
Make sure that your kit contains the following items:
•Westell WireSpeed Dual Connect NAT Router
•Power Supply
•
•USB cable
•
•Westell
•Quick Start Guide
5.3 Microfilters
ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, computer modem or any similar conventional device. Failure to do so may degrade telephone voice quality and ADSL performance. Install a microfilter if you desire to use the
5.4 Router Installations
This section explains the procedures for installing Westell’s Dual Connect Router via 10/100
NOTE: This product supports simultaneous use of Ethernet and USB ports. Please wait until you have received notification from your Service Provider that your DSL line has been activated before installing your Dual Connect Router. See section 5.4.3 for instructions on simultaneous hardware (Ethernet and USB) installation.
5 | March 2003 |