Westell Technologies 2100 manual User Guide

User Guide WireSpeed Dual Connect NAT Router

If you want to save your new firewall settings, click on save in the screen labeled User Define Firewall Rules.

The information in this screen depends on the level of security you have selected.

NOTE: Westell recommends that you do not change the settings in the User Defined Firewall Rules screen. If you need to reset the Router to factory default settings, push the reset button on the rear of the Router.

If you clicked save in the User Define Firewall Rules screen, the following pop-up screen will be displayed. Click OK when asked Do you wish to save these Rules to Flash and switch you Security Level to “User”? This will save your new firewall settings. If you click Cancel, your new firewall settings will not be saved.

030-300198 Rev. D 69 March 2003