Westell Technologies 2100 manual Disabling the Dhcp Server

User Guide WireSpeed Dual Connect NAT Router

DHCP Lease Time

Factory Default = 01:00:00:00

Displays the amount of time the provided addresses will be valid, after which the DHCP client will usually re-submit a request.

NOTE: DHCP Lease Time is displayed in the format (dd:hh:mm:ss)*. (This value must be greater than 10 seconds.) The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and hours must be between 0 and 23.

*(dd = days, hh = hours, mm = minutes, ss = seconds)

Disabling the DHCP Server

If you click on the pull-down arrow at DHCP Server:, a list of options will be displayed. If you want to disable your DHCP server, select Off from the DHCP Server pull-down arrow (see the screen below). The next screen will be displayed immediately.

If you selected Off at DHCP Server:, the following screen will be displayed immediately. Click on save to save the DHCP Server setting. Click on save.

030-300198 Rev. D 49 March 2003