INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The recommended cross-section area is six square millimetres (6.00mm2).

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The cable must be routed away from potentially hot areas marked by X in the diagram below.

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the compartment.

This is a type Y appliance which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm all around the appliance is required to enable the appliance to be moved into position.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix SIE454 installation instructions Introduction, Rating Plate, Installation
Page 7 Page 9

SIE454 specifications

The Tricity Bendix SIE454 is a remarkable appliance that stands out in modern kitchen setups, specifically designed for those who appreciate both functionality and style. This built-in oven combines advanced technology with user-friendly features, making it a compelling choice for home cooks and culinary enthusiasts alike.

One of the standout characteristics of the SIE454 is its impressive capacity. With a generous interior volume, this oven easily accommodates larger dishes, making it perfect for family gatherings or hosting dinner parties. The multi-function capability further enhances its versatility, offering a range of cooking options including conventional baking, grilling, and even combination cooking. This adaptability allows users to experiment and achieve the best results for a variety of recipes.

The SIE454 is equipped with an intuitive control panel that features easy-to-read dials and buttons, allowing users to select their desired settings with minimal effort. This user-friendly interface is designed to simplify the cooking process, ensuring that even novice cooks can navigate the oven's features with ease.

In terms of technology, the Tricity Bendix SIE454 incorporates advanced heating elements that provide even heat distribution throughout the oven. This ensures that food is cooked uniformly, reducing the chances of undercooked or overcooked meals. The built-in fan also aids in achieving consistent results by circulating hot air, which is particularly beneficial for baking and roasting.

Another notable feature of the SIE454 is its energy efficiency. As consumers become increasingly conscious of their environmental impact, this oven stands out by utilizing energy-saving technologies that minimize power consumption without compromising performance. This eco-friendly approach not only benefits the planet but also reduces utility bills for homeowners.

Moreover, the SIE454 boasts a sleek and modern design, easily complementing any kitchen decor. Its stainless-steel finish not only adds a contemporary touch but is also easy to clean, maintaining its aesthetic appeal over time.

Safety is also a priority with the Tricity Bendix SIE454. The oven is designed with several safety features, including a cool-touch door that prevents burns during operation. This focus on safety makes it a practical choice for families and busy kitchens.

In conclusion, the Tricity Bendix SIE454 is an exceptional built-in oven that combines efficiency, versatility, and style. With its advanced features and technologies, it meets the demands of modern cooking while ensuring ease of use and safety. Whether for everyday meals or special occasions, the SIE454 is a reliable companion in any kitchen.
Top Page Image Contents