030-300198 Rev. D 26
March 2003
WireSpeed Dual Connect NAT Router User Guide
Enter the VPI and VCI values that you obtained from your Internet Service Provider. Click on next.
Select the Protocol type that you obtained from your Internet service provider. Click on next.
NOTE: Depending on your Internet Service
Provider, the VPI/VCI screen may come pre-
configured and it will be displayed here. In this
case, you will not be able to change any values
in this screen. Click on next to go to the
PROTOCOL screen.
NOTE: Depending on your Internet Service
Provider, the PROTOCOL screen may
come pre-configured and it will be displayed
here. In this case, you will need to click on
next to go to the SET-UP COMPLETE
screen.