User Guide | WireSpeed Dual Connect NAT Router |
3.Windows ME: The window below confirms that the PC has finished loading the drivers. See Figure 20. Click Finish.
Figure 20. Found New Hardware
4.Windows ME: When the System Settings Change screen appears, the USB drivers are installed properly. See Figure 21. Click Yes.
Figure 21. Restart the Computer
Congratulations! You have completed the software installation for the USB drivers. After the computer has restarted, the Router is ready for use. Refer to the Internet Service Provider (ISP) installation manual to install the software required for your Internet connection. You must now go to section 7.
18 | March 2003 |
