Westell Technologies 2100 manual Enabling Static NAT

User Guide WireSpeed Dual Connect NAT Router

Enabling Static NAT

At the Service Configuration screen, select the Router’s default account profile from the Current Profile pull- down box. Click on the static NAT button.

NOTE: In the following screen, the default account profile is labeled Default. However, if you have renamed default account profile, you must select the name you created as the default.

If you click on the static NAT button, the following screen will be displayed. Select a device from the Static NAT Device pull-down box and click on enable. This will automatically enable the Static NAT feature for the device you select.

030-300198 Rev. D 75 March 2003