![](/images/new-backgrounds/1263324/26332475x1.webp)
User Guide | WireSpeed Dual Connect NAT Router |
Selecting the Ethernet Configuration
After clicking on OK in the previous step, the Network screen will be displayed. The Network screen shows the settings for the newly created location. From the Configure field in the Network screen, select
NOTE: Default settings for the
Checking the IP Connection
To verify that the computer is communicating with the Router, follow the instructions below.
1.Go to the “Apple” icon in the upper right corner of the screen and select System Preferences.
2.From the System Preferences screen, click on the Network icon. The Network screen will be displayed.
3.From the Configure field in the Network screen, select
4.View the IP address field. An IP address that begins with 192.168.1 should be displayed.
NOTE: The DHCP server provides this IP address. If this IP address is not displayed, check the Router’s wiring connection to the PC. If necessary, refer to section 5 for installation instructions.
36 | March 2003 |