User Guide | WireSpeed Dual Connect NAT Router |
If the settings you have entered in the Private LAN Configuration screen are incorrect, the following warnings messages may be displayed via
Warning Message | Check Private LAN DHCP Settings |
Start Address is not part of the Subnet | Check the value in the DHCP Start Address field |
End Address is not part of the Subnet | Check the value in the DHCP End Address field |
End Address is below the Start Address | Check the value in the DHCP End Address field |
Lease time must be greater than 10 seconds | Check the values in the DHCP Lease Time fields |
Seconds must be between 0 and 53 | Check the Seconds value in the DHCP Lease Time field |
Minutes must be between 0 and 59 | Check the Minutes value in the DHCP Lease Time field |
Hours must be between 0 and 23 | Check the Hours value in the DHCP Lease Time field |
Public LAN Configuration
The following screen will be displayed if you select Public LAN Configuration from the Configuration menu.
NOTE: The Public LAN feature, if available from your service provider, allows the Router to use LAN IP addresses that are accessible from the WAN. Public LAN allows your computer to have global address ability. To utilize the Public LAN feature on your Router, your ISP must support Public LAN and Static IP. Contact your ISP for details.
| Public LAN DHCP Server Enable | Default = NOT CHECKED |
|
|
|
| If this box is CHECKED, it enables DHCP addresses to be served |
|
|
|
| from the Public LAN pool. |
|
|
| Public LAN Enable | Default = NOT CHECKED |
|
|
|
| If this box is CHECKED, it enables the addresses from the Public |
|
|
|
| LAN to bypass the NAT interface. |
|
|
| Public LAN IP Address | Provides a Public IP Address if the service provider does not |
|
|
|
| automatically provide one. |
|
|
| Public LAN Subnet Mask | Provides a Public Subnet Mask if the service provider does not |
|
|
|
| automatically provide one. |
|
|
|
|
|
|
|
| 53 | March 2003 | ||
