HP 7000 dl Router manual Show ip bgp neighbors ip address, Advertised-routes

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip bgp neighbors <ip address>

Use the show ip bgp neighbors command to display information for the specified neighbor. Variations of this command include the following:

show ip bgp neighbors

show ip bgp neighbors <ip address>

show ip bgp neighbors <ip address> [advertised-routes received-routes routes]

Syntax Description

<ip address>	Displays information for the specified neighbor. If no IP address is entered,
	information for all neighbors is displayed.
advertised-routes	Displays all routes being advertised to the specified neighbor. Command output
	is the same as for show ip bgp except filtered to only the BGP routes being
	advertised to the specified neighbor.
received-routes	Displays all routes (accepted and rejected) advertised by the specified neighbor.
	Routes may be rejected by inbound filters such as prefix list filters.
routes	Displays all accepted received routes advertised by the specified neighbor.
	Routes displayed have passed inbound filtering. This command output is the
	same as show ip bgp except the output is filtered to those learned from the
	specified neighbor.
Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries that are deemed the best path to advertised route are marked with a caret (>).

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 144