HP 7000 dl Router manual Hold-queue queue size out, Config#interface ppp 1 config-ppp1#hold-queue

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

hold-queue <queue size> out

Use the hold-queuecommand to change the overall size of an interface's WAN output queue.

Syntax Description

<queue size>	The total number of packets the output queue can contain before packets are
	dropped. Range 16-1000.

Default Values

The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay round-robin is 200.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: virtual PPP (ppp 1) and virtual Frame Relay interfaces
	(fr 1)

Usage Examples

The following example sets the overall output queue size to 700:

(config)#interface ppp 1 (config-ppp1)#hold-queue 700

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 745