HP 7000 dl Router manual Show ip dhcp-client lease interface, #show dhcp-client lease

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip dhcp-client lease <interface>

Use the show ip dhcp-client lease command to display all Dynamic Host Client Protocol (DHCP) lease information for interfaces that have dynamically assigned IP addresses.

Syntax Description

<interface>	Optional. Displays the information for the specified interface. Type show ip
	dhcp-client lease ? for a complete list of applicable interfaces.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show dhcp-client lease command:

>enable

#show dhcp-client lease

Interface: ethernet 0/1

Temp IP address: 10.100.23.64 Mask: 0.0.0.0

DHCP Lease server: 10.100.23.207 State: Bound (3)

Lease: 120 seconds

Temp default gateway address: 0.0.0.0

Client-ID: N/A

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 147