HP 7000 dl Router manual Login

SROS Command Line Interface Reference Guide Line (Console) Interface Config Command Set

login

Use the login command to enable security login on the line session requiring the password configured using the password command. Use the no form of this command to disable the login feature.

Syntax Description

No subcommands.

Default Values

By default, there is no login password set for access to the unit.

Command Modes

(config-line)#	Line Configuration Mode
	Valid interfaces include: Console (con 0) and Telnet (telnet X)

Usage Examples

The following example enables the security login feature and specifies a password on the available console session:

(config)#line console 0 (config-console 0)#login (config-console 0)#password mypassword

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 880