HP 7000 dl Router manual Pppoe ac-name name

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

pppoe ac-name <name>

Use the pppoe ac-namecommand to identify the Access Concentrator (AC) with which the Secure Router OS expects to establish a PPPoE session. Use the no form of this command to return to the default setting.

Syntax Description

<name>	Enter a text string (up to 255 characters) corresponding to the AC-Name Tag
	under RFC 2516. If this field is not specified, any access concentrator is
	acceptable. The AC value may be a combination of trademark, model, and serial
	ID information (or simply the MAC address of the unit).

Default Values

By default, no AC is specified.

Command Modes

(config-ppp 1)# PPP Interface Configuration Mode required

Usage Examples

The following example identifies the AC with which the Secure Router OS expects to establish a PPPoE session:

(config)#interface ppp 1

(config-ppp 1)#pppoe acc-name Access_Concentrator_Name

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 774