HP 7000 dl Router manual #show qos map priority qos map priority

SROS Command Line Interface Reference Guide Enable Mode Command Set

packets matched by map: 4326 map entry 60

match IP packets with a dscp value of 2 set dscp value to 6

packets matched by map: 0 map entry 70

match NetBEUI frames being bridged by the router priority bandwidth: 150 (kilobits/sec) burst: default packets matched by map: 0

qos map tcp_map map entry 10

match ACL tcp

priority bandwidth: 10 (kilobits/sec) burst: default set precedence value to 5

packets matched by map: 0 map entry 20

match IP packets with a precedence value of 3 priority bandwidth: 50 (kilobits/sec) burst: default packets matched by map: 0

The following example shows the “priority” qos map and all entries in that map:

#show qos map priority qos map priority

map entry 10

match IP packets with a precedence value of 6 priority bandwidth: 400 (kilobits/sec) burst: default packets matched by map: 125520

map entry 20 match ACL icmp

packets matched by map: 99 map entry 30

match RTP packets on even destination ports between 16000 and 17000 packets matched by map: 0

map entry 50 match ACL tcp

packets matched by map: 4326 map entry 60

match IP packets with a dscp value of 2 set dscp value to 6

packets matched by map: 0 map entry 70

match NetBEUI frames being bridged by the router

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 180