HP 7000 dl Router manual Show flash, Enable #show flash

SROS Command Line Interface Reference Guide Enable Mode Command Set

show flash

Use the show flash command to display a list of all files currently stored in FLASH memory.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample show flash output:

>enable

#show flash

Files:

245669 010100boot.biz

1141553 new.biz

821startup-config 1638 startup-config.old

1175679 020016.biz

821 startup-config.bak

2572304 bytes used 4129776 available 6702080 total

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 125