Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems pmn manual Example, Syntax, Description, Options

Models: pmn

1 150

Download 150 pages 2.96 Kb

Page 127

Manual background

Network Tools

Example:

->telnet 134.141.12.345 Trying 134.141.12.345 Connected to 134.141.12.345

SunOS UNIX (server1)

login:

			telnet
link_trap:

Syntax:		link_trap [enable/disable/status][PORT/all]
Description:		The link_trap command allows link traps to be
		enabled or disabled either one port at a time or
		all ports at once. Specifying a single port
		number will affect only that port, while
		specifying all will affect every port. The current
		status of a single port, or all ports, can also be
		shown.
Options:		Not Applicable
Example:

	->link_trap status
	LINK TRAP STATUS:
	Port 1 is ENABLED		Port 2 is DISABLED
	Port 3 is ENABLED		Port 4 is ENABLED

->link_trap disable 2

Link traps have been DISABLED on port 2

->link_trap disable all

Link traps have been DISABLED on all ports (1-4)

->link_trap status 3

Link traps are ENABLED on port 3

linktrap

2M46-04R/2M46-04RDC User’s Guide

5-79

Image 127

Cabletron Systems pmn manual Example, Syntax, Description, Options

Contents

H S I M 2M46-04R/2M46-04RDC SmartSwitch User’s Guide2M46-04R RESETCOM 9032363-02Page FCC NOTICE Only qualiﬁed personnel should perform installation procedures2M46-04R/2M46-04RDC User’s Guide 2M46-04R/2M46-04RDC User’s Guide INDUSTRY CANADA NOTICEVCCI NOTICE CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT2M46-04R/2M46-04RDC User’s Guide EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITYCABLETRON SOFTWARE PROGRAM LICENSE UNITED STATES GOVERNMENT RESTRICTED RIGHTS2M46-04R/2M46-04RDC User’s Guide SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERSSAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS LASER RADIATION AND CONNECTORSManufacturer’s Name Cabletron Systems, Inc DECLARATION OF CONFORMITY2M46-04R/2M46-04RDC User’s Guide Application of Council Directives 89/336/EEC 73/23/EEC2M46-04R/2M46-04RDC User’s Guide INTRODUCTION CONTENTSINSTALLATION CHAPTERCHAPTER CONTENTSTROUBLESHOOTING CHAPTER2M46-04R/2M46-04RDC User’s Guide CONTENTSSPECIFICATIONS APPENDIX AMODE SWITCH BANK SETTINGS CONTENTSSPECIFICATIONS OPTIONAL INSTALLATIONS ANDCHAPTER INTRODUCTION 1.1 USING THIS GUIDE1.2 STRUCTURE OF THIS GUIDE 2M46-04R 1.3 2M46-04R OVERVIEW1.3.1 Connectivity 1.3.2 Full Duplex Switched Ethernet1.3.4 SmartTrunk 1.3.3 Auto-Negotiation1.3.6 Management 1.3.5 Runtime IP Address Discovery1.3.9 Year 2000 Compliance 1.3.7 Switching1.3.10 LANVIEW Diagnostic LEDs 1.3.8 Standards CompatibilityTable 1-1 Fast Ethernet Interface Modules 1.3.11 Optional Features2M46-04R/2M46-04RDC User’s Guide 1.4 DOCUMENT CONVENTIONSThe following conventions are used throughout this document Chapter 1 Introduction1.5 GETTING HELP Cabletron Systems Cabling Guide 1.6 RELATED MANUALSThe following manuals may help to set up, control, and manage the 2M46-04R using SNMP network management systems2.1 SmartTrunk CHAPTER NETWORK REQUIREMENTS2.2 100BASE-TX NETWORK 2.3 100BASE-FX FIBER OPTIC NETWORK 3.1 UNPACKING THE 2M46-04R CHAPTER INSTALLATIONInstall any optional equipment before proceeding to Section 3.2 INSTALLING OPTIONS3.3 INSTALLING THE 2M46-04R 3.3.1 Tabletop or Shelf InstallationA = 15 cm 6 in B = 57 cm 22.5 in C = 53 cm 21 in D = 213 cm 7 ft Guidelines for the Rackmount Installation 3.3.2 2M46-04R and 2M46-04RDC Rackmount InstallationAttaching the Strain-Relief Bracket Proceed as follows to install the 2M46-04R into a 19-inch rack Figure 3-4 Installing the 2M46-04R in a Rack Figure 3-3 Installing the Rackmount BracketsBonding the Rackmount Brackets to the 2M46-04RDC Remove Paint Screws Figure 3-5 Installing the 2M46-04RDC Rackmount BracketsFigure 3-6 Installing the 2M46-04RDC in a Rack Rackmount Brackets3.4.1 Connecting Power to the 2M46-04R 3.4 CONNECTING POWER3.4.2 Connecting Power to the 2M46-04RDC 48 or 60 Vdc Power Source 3.5.1 Connecting a UTP Segment to the FE-100TX 3.5 CONNECTING TO THE NETWORKA schematic of a crossover cable is shown in Figure 3.5.2 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3 RX LED Figure 3-11 FE-100FX and FE-100F3 Ports3.6 COMPLETING THE INSTALLATION 3-16 Chapter 3 Installation2M46-04R/2M46-04RDC User’s Guide 4.1 USING LANVIEW CHAPTER TROUBLESHOOTINGFlashing indicates an irregular LED pulse Chapter 4 Troubleshooting2M46-04R/2M46-04RDC User’s Guide 2M46-04R/2M46-04RDC User’s Guide Using LANVIEWTable 4-1 LANVIEW LEDs Continued 100 LED 4.2 FE-100TX LEDReceive RX LED 2M46-04R/2M46-04RDC User’s Guide Table 4-3 10/100 LED Indications When RX LED Is OffFE-100TX LED No link exists if the associated port 1 or 2 RX Receive LED is off2M46-04R/2M46-04RDC User’s Guide 4.3 TROUBLESHOOTING CHECKLISTChapter 4 Troubleshooting Table 4-4 Troubleshooting Checklist2M46-04R RESET COM 4.4 USING THE RESET BUTTON2M46-04R/2M46-04RDC User’s Guide Chapter 4 Troubleshooting5.1 OVERVIEW CHAPTER LOCAL MANAGEMENTTable 5-1 Keyboard Conventions 5.2 LOCAL MANAGEMENT KEYBOARD CONVENTIONSChapter 5 Local Management 2M46-04R/2M46-04RDC User’s Guide5.3.1 Console Cable Connection 5.3 MANAGEMENT TERMINAL SETUP2M46-04R Chapter 5 Local Management2M46-04R/2M46-04RDC User’s Guide Figure 5-1 Management Terminal Connection2M46-04R/2M46-04RDC User’s Guide 5.3.2 Management Terminal Setup ParametersManagement Terminal Setup Table 5-2 VT Terminal Setup5.3.3 Telnet Connections 5.3.4 Connecting an Uninterruptible Power SupplyDB9 Port RJ45 COM Port Management Terminal SetupFigure 5-2 Uninterruptible Power Supply UPS Connection 2M46-04R/2M46-04RDC User’s Guide5.4 ACCESSING LOCAL MANAGEMENT 5.4.1 Navigating Local Management Screens 5-10 Figure 5-4 802.1D Switching Mode, LM Screen HierarchyFigure 5-5 802.1Q Switching Mode, LM Screen Hierarchy Chapter 5 Local Management5.4.3 Exiting Local Management Screens 5.4.2 Selecting Local Management Menu Screen Items5.5 DEVICE MENU SCREEN DEVICE STATISTICS DEVICE CONFIGURATIONNETWORK TOOLS Figure 5-8 Device Conﬁguration Menu Screen 5.6 DEVICE CONFIGURATION MENU SCREENDEVICE SPECIFIC CONFIGURATION GENERAL CONFIGURATIONSWITCH CONFIGURATION SMARTTRUNK CONFIGURATION5.7 GENERAL CONFIGURATION SCREEN Device Date Modiﬁable Default Gateway ModiﬁableSubnet Mask Modiﬁable TFTP Gateway IP Addr ModiﬁableDisplays the total time that the device has been operating 5.7.1 Setting the IP Address 5.7.2 Setting the Subnet Mask 5.7.4 Setting the TFTP Gateway IP Address 5.7.3 Setting the Default Gateway5.7.5 Setting the Device Date 5.7.7 Entering a New Screen Refresh Time 5.7.6 Setting the Device Time5.7.9 Setting the Operational Mode 5.7.8 Setting the Screen Lockout Time802.1D SWITCHING, 802.1Q SWITCHING or SECURE FAST VLAN 5.7.10 Conﬁguring the COM Port 5.7.10.1 Changing the COM Port Application 3. Press ENTER to accept the application 5.7.11 Clearing NVRAM 5.8 SNMP COMMUNITY NAMES SCREEN 5.7.12 Enabling/Disabling IP FragmentationThe following explains each SNMP Community Names screen ﬁeld 5.8.1 Establishing Community Names 5.9 SNMP TRAPS SCREEN 5.9.1 Conﬁguring the Trap Table Figure 5-15 Switch Conﬁguration Screen 5.10 SWITCH CONFIGURATION SCREENThe following describes each ﬁeld of the Switch Conﬁguration screen 5.10.2 Setting the Age Time Field 5.10.1 Setting the STAStatus Toggle 5.11 DEVICE SPECIFIC CONFIGURATION MENU SCREEN 5.10.3 Setting Enabling or Disabling the Port StatusFigure 5-16 Device Speciﬁc Conﬁguration Menu Screen HIGH SPEED INTERFACE CONFIGURATIONSYSTEM RESOURCES FLASH DOWNLOADBROADCAST SUPPRESSION 5.12 SYSTEM RESOURCES SCREEN802.1Q VLAN CONFIGURATION PORT REDIRECT FUNCTIONThe following brieﬂy explains each ﬁeld of the System Resources screen 5.12.1 Setting the Reset Peak Switch Utilization 5-42 5.13 HIGH SPEED INTERFACE CONFIGURATION MENU SCREENTo access the High Speed Interface Conﬁguration Menu screen Chapter 5 Local ManagementHSIMS FAST ETHERNET INTERFACESFigure 5-19 High Speed Interface Conﬁguration Screen 5.14 HIGH SPEED INTERFACE CONFIGURATION SCREENDesired Oper. Mode Selectable Port Type Read-onlyLink Status Read-only Current Oper. Mode Read-onlyAdvertised Ability Selectable 5.14.1 Conﬁguring an FE-100FX or FE-100F3 in Port 1 or5.14.4 Setting the FE-100TX Desired Operational Mode 5.14.2 Setting the FE-100FX or FE-100F3 Desired Operational Mode5.14.3 Conﬁguring an FE-100TX in Port 1 or 5.15 FLASH DOWNLOAD SCREEN 5.14.5 Setting the FE-100TX Advertised AbilityThe following brieﬂy explains each ﬁeld of the Flash Download screen 5.15.1 Image File Download Using BootP 5.15.2 Image File Download Using TFTP 5.15.3 Image File Download Using Runtime Port Redirect function is not supported in 802.1Q mode 5.16 PORT REDIRECT FUNCTION SCREEN5.16.1 Displaying the Source and Destination Entries 5.16.2 Changing Source and Destination Ports Figure 5-22 Broadcast Suppression Screen 5.17 BROADCAST SUPPRESSION SCREENReset Peak Toggle 5.17.1 Setting the ThresholdTime Since Peak Read-Only 5.18 DEVICE STATISTICS MENU SCREEN 5.17.2 Setting the Reset Peak RateThe Device Statistics Menu screen displays the following items Port # Read-Only 5.19 SWITCH STATISTICS SCREENFigure 5-24 Switch Statistics Screen Chapter 5 Local Management5.19.1 Using the Clear Counters Command 2M46-04R/2M46-04RDC User’s Guide 5.20 INTERFACE STATISTICS SCREENChapter 5 Local Management 5-62InOctets Read-only InErrors Read-onlyInterface Read-only Name Read-onlyOutUnicast Read-only OutErrors Read-onlyAdmin Status Read-only OutOctets Read-only5.20.1 Displaying Interface Statistics 5.21 RMON STATISTICS SCREEN 5.20.2 Using the Clear Counters CommandStatus Read-only RMON Index Read-onlyData Source Read-only Owner Read-onlyOversized Pkts Read-only CRC Align Errors Read-onlyMulticast Pkts Read-only Undersized Pkts Read-only128 - 255 Octets Read-only Total Octets Read-only64 Octets Read-only 65 - 127 Octets Read-onlyType help at the prompt to list all the commands that are 5.21.2 Using the Clear Counters Command5.21.1 Displaying RMON Statistics 5.22 NETWORK TOOLSThere are two categories of commands in the command set Options 5.22.1 Built-in CommandsSyntax DescriptionOptions 1 - Other 2 - Invalid entry cannot ping device, timed out, etcExample Example SyntaxDescription OptionsExample SyntaxDescription OptionsOptions SyntaxresetNot Applicable show protocol tableDescription not reached, the command displays all next-hopExample SyntaxSyntax OptionsNot Applicable ExampleOptions ExampleSyntax DescriptionOptions 5.22.2 Special CommandsSyntax DescriptionA.2 PHYSICAL PROPERTIES APPENDIX A SPECIFICATIONSA.1 DEVICE SPECIFICATIONS A.3 ELECTRICAL SPECIFICATIONSA.5 INPUT/OUTPUT PORTS A.4 ENVIRONMENTAL REQUIREMENTSA.7 REGULATORY COMPLIANCE A.6 COM PORT/PIN ASSIGNMENTS2M46-04R/2M46-04RDC User’s Guide Appendix A SpeciﬁcationsB.1 FE-100TX APPENDIX B FE-100TX, FE-100FX, AND FE-100F3 SPECIFICATIONSAppendix B FE-100TX, FE-100FX, and FE-100F3 Speciﬁcations B.2 FE-100FX2M46-04R/2M46-04RDC User’s Guide FE-100F3 B.3 FE-100F3FE-100F3 2M46-04R/2M46-04RDC User’s Guide2M46-04R/2M46-04RDC User’s Guide Appendix B FE-100TX, FE-100FX, and FE-100F3 SpeciﬁcationsC.1 REQUIRED TOOLS APPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGSC.2 REMOVING THE CHASSIS COVER Figure C-1 Removing the Chassis Cover C.2.1 Setting the Mode SwitchRemoving the Chassis Cover 2M46-04R/2M46-04RDC User’s GuideSwitch deﬁnitions and positions are as follows Switch 7 - Clear NVRAM. Changing the position of this switch resets NVRAM on either the next power-up or the next operation of the front panel RESET button. All user-entered parameters, such as the IP address, device names, etc., are reset to the factory default settings. Once the 2M46-04R resets, you can either use the factory default settings or reenter your own parameters 2M46-04R/2M46-04RDC User’s Guide C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULESAppendix C Optional Installations and Mode Switch Bank Settings Figure C-3 Fast Ethernet Interface Module Connector Locationb. Lift and remove the coverplate from the top of the front standoffs 2. Remove the screw from the rear standoff. Save the screw 7. Reinstall the cover C-10 Appendix C Optional Installations and Mode Switch Bank Settings2M46-04R/2M46-04RDC User’s Guide Index-1 INDEXNumerics 2M46-04R/2M46-04RDC User’s GuideIndex-2 Index2M46-04R/2M46-04RDC User’s Guide 2M46-04R/2M46-04RDC User’s Guide IndexIndex-3 Index-4 Index2M46-04R/2M46-04RDC User’s Guide