Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems pmn manual 4.2 FE-100TX LED, 100 LED, Receive RX LED

Models: pmn

1 150

Download 150 pages 2.96 Kb

Page 44

4.2FE-100TX LED

Chapter 4: Troubleshooting

4.2FE-100TX LED

The optional FE-100TX has one LED labeled 10/100. The 10/100 LED together with the receive LED allows the user to determine the link status and the operating speed of the Fast Ethernet Interface Module. The 10/100 LED and the Receive (RX) LED are shown in Figure 4-2.

Table 4-2and Table 4-3provide a functional description of the 10/100 LED when the RX LED is on or off, respectively.

10

100 LED

HSIM 1

Receive (RX) LED

x	=
	10
	100
FE-100TX
21	22

1960-41

Figure 4-2 FE-100TX LED

NOTE

A link exists if the associated port (1 or 2) RX (Receive) LED is on.

Table 4-2 10/100 LED Indications When RX LED Is On

	LED	Color	Indication


	10/100	Off	FE-100TX is operating at 10 Mbps.

		Green	FE-100TX is operating at 100 Mbps.
		Green	FE-100TX is operating at 100 Mbps.

4-4	2M46-04R/2M46-04RDC User’s Guide

Image 44

Cabletron Systems pmn manual 4.2 FE-100TX LED, 100 LED, Receive RX LED

Contents

2M46-04R/2M46-04RDC SmartSwitch User’s Guide 2M46-04R RESETCOM9032363-02 H S I MPage 2M46-04R/2M46-04RDC User’s Guide Only qualiﬁed personnel should perform installation proceduresFCC NOTICE INDUSTRY CANADA NOTICE VCCI NOTICECABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT 2M46-04R/2M46-04RDC User’s GuideEXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY CABLETRON SOFTWARE PROGRAM LICENSEUNITED STATES GOVERNMENT RESTRICTED RIGHTS 2M46-04R/2M46-04RDC User’s GuideSAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERSLASER RADIATION AND CONNECTORS 2M46-04R/2M46-04RDC User’s GuideDECLARATION OF CONFORMITY 2M46-04R/2M46-04RDC User’s GuideApplication of Council Directives 89/336/EEC 73/23/EEC Manufacturer’s Name Cabletron Systems, Inc2M46-04R/2M46-04RDC User’s Guide CONTENTS INSTALLATIONCHAPTER INTRODUCTIONCONTENTS TROUBLESHOOTINGCHAPTER CHAPTERCONTENTS SPECIFICATIONSAPPENDIX A 2M46-04R/2M46-04RDC User’s GuideCONTENTS SPECIFICATIONSOPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGS1.2 STRUCTURE OF THIS GUIDE 1.1 USING THIS GUIDECHAPTER INTRODUCTION 1.3 2M46-04R OVERVIEW 2M46-04R1.3.2 Full Duplex Switched Ethernet 1.3.1 Connectivity1.3.3 Auto-Negotiation 1.3.4 SmartTrunk1.3.5 Runtime IP Address Discovery 1.3.6 Management1.3.7 Switching 1.3.10 LANVIEW Diagnostic LEDs1.3.8 Standards Compatibility 1.3.9 Year 2000 Compliance1.3.11 Optional Features Table 1-1 Fast Ethernet Interface Modules1.4 DOCUMENT CONVENTIONS The following conventions are used throughout this documentChapter 1 Introduction 2M46-04R/2M46-04RDC User’s Guide1.5 GETTING HELP 1.6 RELATED MANUALS The following manuals may help to set up, control, and manage the2M46-04R using SNMP network management systems Cabletron Systems Cabling Guide2.2 100BASE-TX NETWORK CHAPTER NETWORK REQUIREMENTS2.1 SmartTrunk 2.3 100BASE-FX FIBER OPTIC NETWORK CHAPTER INSTALLATION 3.1 UNPACKING THE 2M46-04R3.2 INSTALLING OPTIONS 3.3 INSTALLING THE 2M46-04R3.3.1 Tabletop or Shelf Installation Install any optional equipment before proceeding to SectionA = 15 cm 6 in B = 57 cm 22.5 in C = 53 cm 21 in D = 213 cm 7 ft Attaching the Strain-Relief Bracket 3.3.2 2M46-04R and 2M46-04RDC Rackmount InstallationGuidelines for the Rackmount Installation Proceed as follows to install the 2M46-04R into a 19-inch rack Bonding the Rackmount Brackets to the 2M46-04RDC Figure 3-3 Installing the Rackmount BracketsFigure 3-4 Installing the 2M46-04R in a Rack Figure 3-5 Installing the 2M46-04RDC Rackmount Brackets Figure 3-6 Installing the 2M46-04RDC in a RackRackmount Brackets Remove Paint Screws3.4 CONNECTING POWER 3.4.1 Connecting Power to the 2M46-04R3.4.2 Connecting Power to the 2M46-04RDC 48 or 60 Vdc Power Source 3.5 CONNECTING TO THE NETWORK 3.5.1 Connecting a UTP Segment to the FE-100TXA schematic of a crossover cable is shown in Figure 3.5.2 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3 Figure 3-11 FE-100FX and FE-100F3 Ports RX LED3.6 COMPLETING THE INSTALLATION 2M46-04R/2M46-04RDC User’s Guide Chapter 3 Installation3-16 CHAPTER TROUBLESHOOTING 4.1 USING LANVIEW2M46-04R/2M46-04RDC User’s Guide Chapter 4 TroubleshootingFlashing indicates an irregular LED pulse Table 4-1 LANVIEW LEDs Continued Using LANVIEW2M46-04R/2M46-04RDC User’s Guide Receive RX LED 4.2 FE-100TX LED100 LED Table 4-3 10/100 LED Indications When RX LED Is Off FE-100TX LEDNo link exists if the associated port 1 or 2 RX Receive LED is off 2M46-04R/2M46-04RDC User’s Guide4.3 TROUBLESHOOTING CHECKLIST Chapter 4 TroubleshootingTable 4-4 Troubleshooting Checklist 2M46-04R/2M46-04RDC User’s Guide4.4 USING THE RESET BUTTON 2M46-04R RESET COMChapter 4 Troubleshooting 2M46-04R/2M46-04RDC User’s GuideCHAPTER LOCAL MANAGEMENT 5.1 OVERVIEW5.2 LOCAL MANAGEMENT KEYBOARD CONVENTIONS Chapter 5 Local Management2M46-04R/2M46-04RDC User’s Guide Table 5-1 Keyboard Conventions5.3 MANAGEMENT TERMINAL SETUP 5.3.1 Console Cable ConnectionChapter 5 Local Management 2M46-04R/2M46-04RDC User’s GuideFigure 5-1 Management Terminal Connection 2M46-04R5.3.2 Management Terminal Setup Parameters Management Terminal SetupTable 5-2 VT Terminal Setup 2M46-04R/2M46-04RDC User’s Guide5.3.4 Connecting an Uninterruptible Power Supply 5.3.3 Telnet ConnectionsManagement Terminal Setup Figure 5-2 Uninterruptible Power Supply UPS Connection2M46-04R/2M46-04RDC User’s Guide DB9 Port RJ45 COM Port5.4 ACCESSING LOCAL MANAGEMENT 5.4.1 Navigating Local Management Screens Figure 5-4 802.1D Switching Mode, LM Screen Hierarchy Figure 5-5 802.1Q Switching Mode, LM Screen HierarchyChapter 5 Local Management 5-105.4.2 Selecting Local Management Menu Screen Items 5.4.3 Exiting Local Management Screens5.5 DEVICE MENU SCREEN NETWORK TOOLS DEVICE CONFIGURATIONDEVICE STATISTICS 5.6 DEVICE CONFIGURATION MENU SCREEN Figure 5-8 Device Conﬁguration Menu ScreenGENERAL CONFIGURATION SWITCH CONFIGURATIONSMARTTRUNK CONFIGURATION DEVICE SPECIFIC CONFIGURATION5.7 GENERAL CONFIGURATION SCREEN Default Gateway Modiﬁable Subnet Mask ModiﬁableTFTP Gateway IP Addr Modiﬁable Device Date ModiﬁableDisplays the total time that the device has been operating 5.7.1 Setting the IP Address 5.7.2 Setting the Subnet Mask 5.7.3 Setting the Default Gateway 5.7.4 Setting the TFTP Gateway IP Address5.7.5 Setting the Device Date 5.7.6 Setting the Device Time 5.7.7 Entering a New Screen Refresh Time802.1D SWITCHING, 802.1Q SWITCHING or SECURE FAST VLAN 5.7.8 Setting the Screen Lockout Time5.7.9 Setting the Operational Mode 5.7.10 Conﬁguring the COM Port 5.7.10.1 Changing the COM Port Application 3. Press ENTER to accept the application 5.7.11 Clearing NVRAM 5.7.12 Enabling/Disabling IP Fragmentation 5.8 SNMP COMMUNITY NAMES SCREENThe following explains each SNMP Community Names screen ﬁeld 5.8.1 Establishing Community Names 5.9 SNMP TRAPS SCREEN 5.9.1 Conﬁguring the Trap Table 5.10 SWITCH CONFIGURATION SCREEN Figure 5-15 Switch Conﬁguration ScreenThe following describes each ﬁeld of the Switch Conﬁguration screen Status Toggle 5.10.1 Setting the STA5.10.2 Setting the Age Time Field 5.10.3 Setting Enabling or Disabling the Port Status 5.11 DEVICE SPECIFIC CONFIGURATION MENU SCREENHIGH SPEED INTERFACE CONFIGURATION SYSTEM RESOURCESFLASH DOWNLOAD Figure 5-16 Device Speciﬁc Conﬁguration Menu Screen5.12 SYSTEM RESOURCES SCREEN 802.1Q VLAN CONFIGURATIONPORT REDIRECT FUNCTION BROADCAST SUPPRESSIONThe following brieﬂy explains each ﬁeld of the System Resources screen 5.12.1 Setting the Reset Peak Switch Utilization 5.13 HIGH SPEED INTERFACE CONFIGURATION MENU SCREEN To access the High Speed Interface Conﬁguration Menu screenChapter 5 Local Management 5-42FAST ETHERNET INTERFACES HSIMS5.14 HIGH SPEED INTERFACE CONFIGURATION SCREEN Figure 5-19 High Speed Interface Conﬁguration ScreenPort Type Read-only Link Status Read-onlyCurrent Oper. Mode Read-only Desired Oper. Mode Selectable5.14.1 Conﬁguring an FE-100FX or FE-100F3 in Port 1 or Advertised Ability Selectable5.14.3 Conﬁguring an FE-100TX in Port 1 or 5.14.2 Setting the FE-100FX or FE-100F3 Desired Operational Mode5.14.4 Setting the FE-100TX Desired Operational Mode 5.14.5 Setting the FE-100TX Advertised Ability 5.15 FLASH DOWNLOAD SCREENThe following brieﬂy explains each ﬁeld of the Flash Download screen 5.15.1 Image File Download Using BootP 5.15.2 Image File Download Using TFTP 5.15.3 Image File Download Using Runtime 5.16 PORT REDIRECT FUNCTION SCREEN Port Redirect function is not supported in 802.1Q mode5.16.1 Displaying the Source and Destination Entries 5.16.2 Changing Source and Destination Ports 5.17 BROADCAST SUPPRESSION SCREEN Figure 5-22 Broadcast Suppression ScreenTime Since Peak Read-Only 5.17.1 Setting the ThresholdReset Peak Toggle 5.17.2 Setting the Reset Peak Rate 5.18 DEVICE STATISTICS MENU SCREENThe Device Statistics Menu screen displays the following items 5.19 SWITCH STATISTICS SCREEN Figure 5-24 Switch Statistics ScreenChapter 5 Local Management Port # Read-Only5.19.1 Using the Clear Counters Command 5.20 INTERFACE STATISTICS SCREEN Chapter 5 Local Management5-62 2M46-04R/2M46-04RDC User’s GuideInErrors Read-only Interface Read-onlyName Read-only InOctets Read-onlyOutErrors Read-only Admin Status Read-onlyOutOctets Read-only OutUnicast Read-only5.20.1 Displaying Interface Statistics 5.20.2 Using the Clear Counters Command 5.21 RMON STATISTICS SCREENRMON Index Read-only Data Source Read-onlyOwner Read-only Status Read-onlyCRC Align Errors Read-only Multicast Pkts Read-onlyUndersized Pkts Read-only Oversized Pkts Read-onlyTotal Octets Read-only 64 Octets Read-only65 - 127 Octets Read-only 128 - 255 Octets Read-only5.21.2 Using the Clear Counters Command 5.21.1 Displaying RMON Statistics5.22 NETWORK TOOLS Type help at the prompt to list all the commands that areThere are two categories of commands in the command set 5.22.1 Built-in Commands SyntaxDescription OptionsExample 1 - Other 2 - Invalid entry cannot ping device, timed out, etcOptions Syntax DescriptionOptions ExampleSyntax DescriptionOptions ExampleSyntaxreset Not Applicableshow protocol table Optionsnot reached, the command displays all next-hop ExampleSyntax DescriptionOptions Not ApplicableExample SyntaxExample SyntaxDescription Options5.22.2 Special Commands SyntaxDescription OptionsAPPENDIX A SPECIFICATIONS A.1 DEVICE SPECIFICATIONSA.3 ELECTRICAL SPECIFICATIONS A.2 PHYSICAL PROPERTIESA.4 ENVIRONMENTAL REQUIREMENTS A.5 INPUT/OUTPUT PORTSA.6 COM PORT/PIN ASSIGNMENTS A.7 REGULATORY COMPLIANCEAppendix A Speciﬁcations 2M46-04R/2M46-04RDC User’s GuideAPPENDIX B FE-100TX, FE-100FX, AND FE-100F3 SPECIFICATIONS B.1 FE-100TX2M46-04R/2M46-04RDC User’s Guide B.2 FE-100FXAppendix B FE-100TX, FE-100FX, and FE-100F3 Speciﬁcations B.3 FE-100F3 FE-100F32M46-04R/2M46-04RDC User’s Guide FE-100F3Appendix B FE-100TX, FE-100FX, and FE-100F3 Speciﬁcations 2M46-04R/2M46-04RDC User’s GuideAPPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGS C.1 REQUIRED TOOLSC.2 REMOVING THE CHASSIS COVER C.2.1 Setting the Mode Switch Removing the Chassis Cover2M46-04R/2M46-04RDC User’s Guide Figure C-1 Removing the Chassis CoverSwitch deﬁnitions and positions are as follows Switch 7 - Clear NVRAM. Changing the position of this switch resets NVRAM on either the next power-up or the next operation of the front panel RESET button. All user-entered parameters, such as the IP address, device names, etc., are reset to the factory default settings. Once the 2M46-04R resets, you can either use the factory default settings or reenter your own parameters C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULES Appendix C Optional Installations and Mode Switch Bank SettingsFigure C-3 Fast Ethernet Interface Module Connector Location 2M46-04R/2M46-04RDC User’s Guideb. Lift and remove the coverplate from the top of the front standoffs 2. Remove the screw from the rear standoff. Save the screw 7. Reinstall the cover 2M46-04R/2M46-04RDC User’s Guide Appendix C Optional Installations and Mode Switch Bank SettingsC-10 INDEX Numerics2M46-04R/2M46-04RDC User’s Guide Index-12M46-04R/2M46-04RDC User’s Guide IndexIndex-2 Index-3 Index2M46-04R/2M46-04RDC User’s Guide 2M46-04R/2M46-04RDC User’s Guide IndexIndex-4