Cabletron Systems pmn manual Built-in Commands, Syntax, Description, Options, Example, arp options

Chapter 5: Local Management

the

NOTE

The conventions used in describing the commands in Network Tools are as follows:

Arguments enclosed by [ ] are required.

Arguments enclosed by < > are optional.

In the following command examples, information entered by the user is in shown in bold Helvetica font.

To abort the output or interrupt a process, press the CONTROL key and c key simultaneously, designated as ^C here.

The commands are presented in the following format:

command:

Syntax:	Shows the required command format. It
	indicates where arguments, if any, must be
	specified.
Description:	Briefly describes the command and its uses.
Options:	Lists any additional fields in the appropriate
	format which may be added to the command.
Example:	Shows an example of the command.

5.22.1 Built-in Commands

The built-in commands listed in this section activate functions on the LM managed device or devices being accessed through Network Tools.

arp:

Syntax: arp [options]

Description:The arp command provides access to the ARP (Address Resolution Protocol) cache, enabling you to view cache data, delete entries, or add a static route. Super-user access is required to delete an entry or add a static route.

5-72 2M46-04R/2M46-04RDC User’s Guide