Cabletron Systems pmn manual General Configuration, Snmp Community Names, Snmp Traps

Device Configuration Menu Screen

The following briefly explains each screen accessible from the Device Configuration Menu screen:

GENERAL CONFIGURATION

The General Configuration screen allows the user to monitor and configure operating parameters for the 2M46-04R. For details, refer to Section 5.7.

SNMP COMMUNITY NAMES

The SNMP Community Names screen allows the user to enter new, change, or review the community names used as access passwords for device management operation. Access is limited based on the password level of the user. For details, refer to Section 5.8.

SNMP TRAPS

The SNMP Traps screen provides display and configuration access to the table of IP addresses used for trap destinations and associated community names. For details, refer to Section 5.9.

SWITCH CONFIGURATION

The Switch Configuration screen provides the basic setup options for customizing switch operations. For details, refer to Section 5.10.

SMARTTRUNK CONFIGURATION

The SmartTrunk Configuration screen allows the user to logically group interfaces together to aggregate high speed uplinks. Refer to the Cabletron Systems SmartTrunk User’s Guide for additional information.

DEVICE SPECIFIC CONFIGURATION

The Device Specific Configuration menu screen allows the user to select screens to configure ports or check system resources specific to the 2M46-04R. For details, refer to Section 5.11.

2M46-04R/2M46-04RDC User’s Guide 5-15