Cabletron Systems pmn manual Image File Download Using TFTP

Flash Download Screen

4.Set the IP address of the TFTP gateway server (this defaults to the same IP address set in the TFTP Gateway IP Addr field in the General Configuration screen).

5.Use the arrow keys to highlight EXECUTE at the bottom of the screen and press ENTER. The message “BOOTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the event message line at the top of the screen and the new image is downloaded into FLASH memory.

5.15.2 Image File Download Using TFTP

To download a firmware image into FLASH using TFTP, proceed as follows:

1.Use the arrow keys to highlight the Download Method field.

2.Use the SPACE bar to select TFTP.

3.Use the arrow keys to highlight the TFTP Gateway IP Addr field.

4.Set the IP address of the TFTP gateway server (this defaults to the same IP address as that set in the TFTP Gateway IP Addr field on the General Configuration screen).

5.Use the arrow keys to highlight the Download Server IP field.

6.Enter the IP address of the TFTP server using the DDN format. For example: 134.141.79.121

7.Use the arrow keys to highlight the Download File Name field.

8.Enter the complete path and file name of the image stored on the download server.

For example: /tftpboot/2M46.hex

9.Use the arrow keys to highlight EXECUTE at the bottom of the screen and press ENTER. The message “TFTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the event message line at the top of the screen and the new image is downloaded into FLASH memory.

2M46-04R/2M46-04RDC User’s Guide 5-51