Cabletron Systems pmn manual Troubleshooting, Flashing indicates an irregular LED pulse

Chapter 4: Troubleshooting

NOTE

The terms flashing, blinking, and solid used in the following tables indicate the following:

Flashing indicates an irregular LED pulse.

Blinking indicates a steady LED pulse (50% on, 50% off). Solid indicates a steady LED light. No pulsing.

Table 4-1 LANVIEW LEDs

LED	Color	State	Recommended Action
PWR	Green	Functional. Power	None.
		supply(ies) operating
		normally.
	Amber	This indication only	1. Ensure that the power
		applies when there are	cords are plugged in
		two power supplies.	correctly and that
		Indicates loss of power	there is power at the
		supply redundancy.	power source.
			2. Contact the Cabletron
			Systems Global Call Center
			(GCC).
CPU	Off	Power off.	Power up device.
	Red	Blinking. Hardware	Contact the Cabletron
		failure has occurred.	Systems GCC.
		Solid. Resetting,	None.
		normal power up reset.
	Amber	Blinking. Crippled.	Contact the Cabletron
			Systems GCC.
		Solid. Testing.	None.
	Green	Solid. Functional.	None.
	Amber	Booting. Alternately	None.
	and	blinks amber and
	Green	green while booting.

4-2 2M46-04R/2M46-04RDC User’s Guide