Cabletron Systems pmn manual General Configuration Screen, None Defined

Chapter 5: Local Management

5.7GENERAL CONFIGURATION SCREEN

The General Configuration screen, Figure 5-9, allows the user to, among other things, set the system date and time, IP address and subnet mask, the default gateway, the TFTP gateway IP address, the operational mode, and the COM port configuration.

To access the General Configuration screen from the Device Configuration Menu screen, use the arrow keys to highlight the GENERAL CONFIGURATION menu item and press ENTER. The General Configuration screen displays.

Event Message Line

		2M46-04R LOCAL MANAGEMENT
			General Configuration
Device Type: 2M46-04R					Firmware Revision:	XX.XX.XX
					BOOTPROM Revision: XX.XX.XX
MAC Address:		00-00-ID-00-00-00			Device Date:	11/29/97
IP Address:					Device Time:	14:23:00
		0.0.0.0
Subnet Mask:	0.0.0.0				Screen Refresh Time:	03 sec.
Default Gateway:		NONE DEFINED			Screen Lockout Time:	15 min.
TFTP Gateway IP Addr:	0.0.0.0				Device Uptime XX D XX H XX M
Operational Mode: [802.1D SWITCHING]
Com 1: [ENABLED]	Application:			[LM]
Clear NVRAM: [NO]	IP Fragmentation			[ENABLED ]
SAVE				EXIT		RETURN

2314-15

Figure 5-9 General Configuration Screen

The following briefly explains each General Configuration screen field:

MAC Address (Read-Only)

Displays the base physical address of the 2M46-04R.

IP Address (Modifiable)

Displays and allows the user to set the IP address for the 2M46-04R. To set the IP address, refer to Section 5.7.1. The IP address can also be set through Runtime IP Address Discovery as previously described in Section 1.3.5.

5-16 2M46-04R/2M46-04RDC User’s Guide