
General Configuration Screen
2.Use the SPACE bar or BACKSPACE to step through the available settings until the operation you require displays. Table
| Table | |
|
|
|
Setting |
| Application |
|
|
|
|
|
|
LM |
| Local Management Session |
|
|
|
UPS |
| APC Power Supply SNMP Proxy |
|
|
|
3.Press ENTER to accept the application.
When the COM port is configured to perform the UPS
!application, all future LM connections must be made by a Telnet
CAUTION | connection. Ensure that the device has a valid IP address |
| |
| before saving changes to the COM port application. If the |
| device does not have a valid IP address and the changes are |
| saved, refer to Appendix C for instructions on clearing NVRAM |
| in order to reestablish COM port communications. |
4.Use the arrow keys to highlight SAVE at the bottom of the screen, then press the ENTER key. When the message “SAVED OK” displays, the edits are saved.
When the COM port is configured to perform the UPS
!application, all future Local Management connections must be
CAUTION | made by establishing a Telnet connection to the device. Ensure |
| |
| that the device has a valid IP address before saving changes to |
| the COM port application. If the device does not have a valid IP |
| address and the changes are saved, refer to Appendix C for |
| instructions on clearing NVRAM in order to reestablish COM |
| port communications. |
|