Cabletron Systems pmn manual Setting the STA, Setting the Age Time Field, Status Toggle

Chapter 5: Local Management

Status (Toggle)

Allows the user to disable or enable a port by setting the status of the listed interface to either ENABLED or DISABLED. To set the port status, refer to Section 5.10.3.

5.10.1 Setting the STA

The Spanning Tree Algorithm (STA) setting allows the user to set the method that the switches use to decide which is the controller (Root) switch when two or more switches are in parallel. The available selections are IEEE, DEC, and NONE.

To set the STA, proceed as follows:

1.Use the arrow keys to highlight the Type of STA field.

2.Use the SPACE bar to step to the appropriate setting (IEEE, DEC, or NONE).

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” is displayed.

5.10.2 Setting the Age Time Field

To set the Age Time, proceed as follows:

1.Use the arrow keys to highlight the Age Time (sec) field.

2.Type in the desired Age Time in increments of 10. The available Age Time range is 10 to 1,000,000 seconds with the default value being 300 seconds.

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” is displayed.

5-36 2M46-04R/2M46-04RDC User’s Guide