Cabletron Systems pmn manual Changing the COM Port Application

Chapter 5: Local Management

WARNING

THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE THIS COM PORT?

YES NO

174252

Figure 5-11 COM Port Warning Screen

3.Use the arrow keys to highlight YES. Press ENTER.

4.If you ENABLED the port, proceed to step 5. If you DISABLED the port, use the arrow keys to highlight SAVE at the bottom of the screen, then press ENTER.

5.When the message “SAVED OK” appears, the edits you made are saved.

Exiting without saving causes the message “NOT SAVED --

!PRESS SAVE TO KEEP CHANGES” to appear. Exiting without

saving causes all edits to be lost.CAUTION

5.7.10.1 Changing the COM Port Application

After enabling the COM port as described in Section 5.7.10, you can select one of the applications supported by the COM port: LM or UPS. The default application is LM.

To change the COM port application:

1.Use the arrows keys to highlight the Application field.

5-26 2M46-04R/2M46-04RDC User’s Guide