Cabletron Systems pmn manual RMON Index Read-only, Data Source Read-only, Owner Read-only

RMON Statistics Screen

The following definitions explain each field of the RMON Statistics screen:

RMON Index (Read-only)

This field displays the current interface for which statistics are being shown. The 2M46-04R has an embedded RMON agent that gathers statistics for each interface on the module.

Data Source (Read-only)

This field displays the source of the statistics data that is currently being displayed on the screen. Figure 5-26shows that the data source for this RMON index is Interface 1 by displaying the name ifIndex.1, chosen by the user in the selectable field at the bottom of the screen. If the screen was displaying RMON statistics for Interface 2, the name displayed would be ifIndex.2.

Owner (Read-only)

This field displays the name of the entity that last configured the device.

Status (Read-only)

The Status field displays the current operating status of the displayed interface. This field will display “valid” or “invalid”.

Drop Events (Read-only)

This field displays the total number of times that the RMON agent was forced to discard frames due to the lack of available switch resources.

NOTE

The Drop Events field does not display the number of frames dropped, it only displays the number of times that the RMON agent was forced to discard frames.

Collisions (Read-only)

This field displays the total number of collisions that have occurred on this interface.

Broadcast Pkts (Read-only)

The Broadcast Pkts field displays the total number of good frames that were directed to the broadcast address. The value of this field does not include multicast frames.

2M46-04R/2M46-04RDC User’s Guide 5-67