Cabletron Systems pmn Switch Statistics Screen, Local Management, Port # Read-Only, 5-60, Exit

Chapter 5: Local Management

5.19SWITCH STATISTICS SCREEN

NOTE

The Switch Statistics screen will displays only if the operational mode of the device has been set to 802.1D SWITCHING or 802.1Q SWITCHING. Refer to Section 5.7.9 for instructions on configuring the device to operate in this mode.

The Switch Statistics screen, Figure 5-24, lists the number of frames received, transmitted, filtered, and forwarded by each interface.

To access the Switch Statistics screen from the Device Statistics Menu screen, use the arrow keys to highlight the SWITCH STATISTICS menu item and press ENTER. The Switch Statistics screen displays.

Event Message Line

		2M46-04R LOCAL MANAGEMENT
		Switch Statistics
Device Type: 2M46-04R			Firmware Revision: XX.XX.XX
			BOOTPROM Revision: XX.XX.XX
IPort #	Frames Rcvd	Frames Txmtd	Frames Fltrd	Frames Frwded
1	100	100	0	100
2	100	100	0	100
3	100	100	0	100
4	100	100	0	100
CLEAR COUNTERS			EXIT
					RETURN

2314-26

Figure 5-24 Switch Statistics Screen

The Switch Statistics screen displays the following fields:

Port # (Read-Only)

Identifies the interface or port number.

Frames Rcvd (Read-Only)

Displays the number of frames received by the interface since last power-up or reset.

5-60 2M46-04R/2M46-04RDC User’s Guide